Whidbey Island Sailboat Interior Wrap
Alex and Anne hired RMwraps to wrap the interior of their fixer-upper sailboat on Whidbey Island, Washington in the fall of 2018. This project took 13 days to complete, using about 2.5 rolls of 3M Di-Noc material.
P.S. They where a wonderful couple to work for!
Here's a walkthrough of the completed project, showing off the clean and contemporary Di-Noc wood grain pattern.Â
smooth believe it or not you can use sandpaper runs on this product it's just
like real wood and also we wrapped all the way in and over and around every
joint we do it is is butt joint so there is no no grab so every joint
when we joined the the vinyl what's called a double cut goes right through
the same thing every drunk we do is we don't overlap or anything on this one okay let's do I'll do a little small or slow walk through and right here we wrapped it with white also up here was white or we wrapped it with white it used to look like you can see that but oh you look like that right there of course I can't see anything yeah there that's a little bit better and I don't fall okay let's do all right here
so it's a table in the table we're gonna put polyurethane over it it'll be a little more durable but I told myself every gets damaged you got plenty of vinyl left over and you can you can do another wine on top of that forever gets damaged but the polyurethane would make it more bowl proof that that's one of the techniques and I did a video for those that door right there if you want to watch the video of how to wrap a boat door okay so in the back room right here we try to do everything in one piece so everything right here you see right here is one piece and it's dark let me see if I can there you go that's a little bit about it's kind of cloudy outside so right there it's not everything right here let's go inside it's gonna give you a little walkthrough right here so the walls everything is wrapped clearing from top all the way down to the bottom underneath is all wrapped we try to make everything uniformed and wrapping everything so on this one right here of course we can't move electrical we wrapped all the way around at one piece also hit all the doors the cabinetry and believe it or not that was fun to do because I couldn't remove this thing right here and I couldn't remove this thing right here also I remove that
right there but I wrapped everything yeah look pretty good so we took a one
piece all right here and wrapped it all over there the only thing I couldn't do
right there back there because it's too far to wrap is the back part right there it's just really challenging to get get it over so we did everything down here the oven is fine the vinyl will be fine right next to the oven also we wrapped everything right here in white doors the walls if you're looking for our boat wrap or yacht wrap you can always get a hold of us 208-696-1180 info@rmwraps.com and pick out samples of what you want to see if we have over a thousand materials you can use different textures and colors and wood grains and stuff like that and I'm just showing you the possibilities of wrapping this boat like again it took me ten days for one guy to do this I want to show you somewhere right here is just the most challenging part right here believe it or not is all right behind the pole one sheet this is all one sheet it's about almost four feet so I hit that and all the way down
and also it was a dozen most challenging part right there of this one of the
childhood with the boat okay there's the closet medical hanger trying
little slow for you guys okay the bathroom so the bathroom was pretty
beat-up I guess that but man literally turned out really good I'm really happy
that turned out very nice okay the sink around the sink and everything
I had to do two cuts basically but you can see I cut all the way around cut
lines right about there so I did one piece all the way halfway around and
then I did another piece right around that okay so let's go on the front of the boat
there we go get the walls cabinetry the shelves and again for the shelves and
all for the cabinetry he was with particle board and I use Zinsser Gards I asked the people of the boat people that using those guards all around it and makes the vinyl stick a lot better okay all done with the tour tell me what youguys think he needs it I say this is actually the booming another booming business gonna be coming up because it's a lot cheaper wrapping a boat in a yacht instead replacing the wood it's a lot faster also with you can update it very well and I I see this is the next trend of 2019 and up and it's growing and getting more and more phone calls for this so stay tuned I do travel all around the country I'm starting a shop
in Las Vegas and next week I'm gonna be down there doing a lot more videos and
getting the shop ready and I'm gonna show you how to do this and that and
also you want to stop by you can and also send the address and everything you
want to talk to me you're in Vegas also in the first of the year I'm gonna go to
Miami and I thought you know but you have to do but also a high-end kitchen
to do and go from there so funny if you're in Miami if you want gonna hold
me be after the first year and I can come over and check out some of your
stuff also whatever so okay thank you for watching if you like this kind of
stuff subscribe to me I get more videos coming and if you want gonna hold on me
208-696-1180 email me at info@rmwraps.com you can check all the materials out or www.rmwrapsstore.com and I would recommend doing samples or even
one little sheet form a four by three sheet and you can test it out or just
see a bigger scale of what you're seeing other than that again thank you for
watching this video.
Materials Used |
|
Videos From This Project |
|
Click Here to see before and after pictures as well as more videos from this project.